Hasselblad H2F Bedienungsanleitung PDF herunterladen (Seite 69)

To change the balance between ash output and camera exposure requirements to

produce a variety of eects, use the exposure compensation function. For various long

exposure eects use the sync function. To make ash exposure tests use the ash meas-

ure function.



Only ﬂash units specially adapted for use with the H2F should be connected to the hot shoe

on the camera.

General

When using the A or S setting together with ash, the exposure requirements of the camera

will dominate which might produce slow shutter speeds indoors, for example, requiring

the use of a tripod. If, on the other hand, you select P or Pv instead, then a shutter speed

of 1/60 or faster is automatically chosen by the camera enabling you to hand hold.

When using ash close up or when using larger aperture settings, remember that the

ash unit’s output has a specic minimum duration which might still be too great for

correct exposure. Read the unit’s output specications for further information regarding

any potential restrictions.

You can use the ash metering capability with external ash units of all kinds (TTL

ashes must be set to Manual mode).

Rear sync is a useful feature used either for eect or to produce a more ‘natural’ look

when combining long exposures involving light trails and ash.

When using suitable dedicated units (compatible with SCA3002), adjustments are made

automatically and governed by the settings on the camera. is applies to whether the

ash unit is set to TTL or whether it is set to its own integral metering system (A).

Control of either the integral ash unit or separate SCA3002 compatible ash unit re-

garding the two functions, exposure compensation and shutter sync, is via the grip. e

ash measure function can be used for ash units that are not SCA 3002 compatible or

for SCA 3002 compatible units at manual setting.

 As with all strobe/studio ﬂash use, very particular attention should be taken to ensure cor-

rect connections and general handling practice. Potential dangers might decrease when

cameras are connected to strobe/studio ﬂash units by way of IR and similar wireless ﬂash

release devices.

Victor Hasselblad AB and Hasselblad A/S can accept no responsibility whatsoever for accidents

that might occur or damage caused when Hasselblad equipment is used in combination

with third-party units of any description.



Do not attempt to connect a ﬂash unit dedicated for use with another camera brand via

the hot shoe. The ﬂash unit and / or camera could be damaged.

The H2F can be used together with most ash units in manual mode. However, to make use of a

TTL automatic function, you must ensure the flash unit is compatible with the SCA 3002 system.

Connection is either by the PC socket or by the hot shoe (see warning note below).

The viewnder houses an integral ll-ash with a guide number of 12 and features OTF/TTL ash

control. This unit is capable of providing enough illumination for many ll ash functions outdoors

as well as simple indoor shots at shorter distances.

Flash output can be adjusted separately from ambient exposure for optimum control.

Separate ash units can be used in dedicated mode when connected to the hot shoe if the unit is

compatible with the SCA3002 (Metz) system using a Hasselblad SCA3902 adapter. This provides a

cable free link up for information transfer.

Flash synchronisation can be set to normal or rear (the beginning or end of an exposure).

Please see the relevant user manuals for information regarding separate ash units.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 85 86

Kommentare zu diesen Handbüchern

Keine Kommentare

Hasselblad H2F Bedienungsanleitung Seite 69

Kommentare zu diesen Handbüchern