Hasselblad H2F Bedienungsanleitung PDF herunterladen (Seite 28)

K L

Databus interface L

Data interface between magazine and camera. Ensure the contacts

are kept clean and protected from damage. Keep the protective

cover on when the magazine is being stored or transported.

Magazine settings lock K

All settings can be locked to avoid inadvertent changes. To change

the settings, slide the settings lock (see illus) to the right until it

stops. Aer the changes have been made, slide the settings lock

to the le (see symbol on magazine) again to secure the new

settings.

Film holder key J

Secures the lm holder in the magazine. Fold out the key and

turn counter-clockwise 90° to remove the lm holder and turn

clockwise 90˚ to lock the lm holder in place.

Film tab holder I

Holds an ID tab from the lm roll pack as a reminder of the type

of lm loaded. Don’t forget to change it if you change lm type!



The darkslide can only be withdrawn when the magazine is at-

tached to the camera.

Darkslide key H

Withdraws and replaces the darkslide. Fold out the key and turn it

counter-clockwise 360° (towards the open symbol) to withdraw it

and clockwise 360° (towards the closed symbol) to replace it.

Darkslide indicator G

Indicates whether the darkslide is in place or withdrawn:

RED = stop ! = exposure CANNOT be made

(magazine can be removed from camera)

WHITE = ok ! = exposure CAN be made

(magazine cannot be removed from cam-

era)

If you attempt to make an exposure when the darkslide is closed,

however, you will receive a warning message in the viewnder

and grip LCDs – ‘e darkslide is closed’.

Film plane index F

Provides a measuring point for the actual position of the lm plane

in the magazine. Used for calculations in critical applications.

 Changes can only be made when the settings lock switch is in the

unlocked position.

Function selector E

Selects the four functions that can be changed on the magazine.

e functions are on a menu loop so that repeated pressing of the

selector button will successively access all functions in turn. Aer

a time-out of ve seconds of non-activity, the display returns to

the main screen.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 85 86

Kommentare zu diesen Handbüchern

Keine Kommentare

Hasselblad H2F Bedienungsanleitung Seite 28

Kommentare zu diesen Handbüchern