Hasselblad X1 Bedienungsanleitung PDF herunterladen (Seite 10)

lines printed on the holder to line up the image. Handle the clear plastic layer only

by the edges to avoid ngerprints. Curl the plastic layer back and slip the front edge

into Flextight’s foil holder.

9. Lay the top layer of the holder down at over the original.

• For the reective holder, note the four metal pegs (the top two are shown as

A and

C in the gure below); make sure that the clear plastic sheet is pressed all the way

down over all four pegs. Note also the two curved tabs at the top of the holder (B in

the gure below); the clear sheet must slip under each of these tabs, as shown.

10. Go to your computer and follow the directions given in the FlexColor software

manual to take a preview, make settings, and take the nal scan. Alternatively you

can press the scan button on the light table. This will initiate a 3F scan according to

your 3F settings.

Resolutions

True Resolutions

e table below shows the max. resolutions (in ppi) available with each of the original

holders when scanning in True Resolutions mode.

Original Max. resolution (ppi) at full scanning width.

35 mm Portrait 8000 (Flextight X5) 6300 (Flextight X1)

35 mm Landscape 5000

45 x 60 mm Portrait 4000

60 x 60 - 60 x 70 mm 3200

4” x 5” Portrait 2040

A4 Portrait 960

Table 1: True Resolutions

! " #

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Keine Kommentare

Hasselblad X1 Bedienungsanleitung Seite 10