Hasselblad 949 Bedienungsanleitung PDF herunterladen (Seite 29)

Solution 2: Move the drum to its home position. To do this, run

FlexColor and select Maintenance > Feeder to open the

Feeder window. en set the Drum position drop-down list

to “home”. Try scanning again.

Solution 3: Make sure that the magazine is pressed fully into the drawer

hinge. See also “Loading Slides” on page 18.

Solution 4: Check that light is not shining directly into the scanner. e

Feeder uses an optical system to monitor the position of the

original holder; this system can be confused if outside light is

shining directly into the scanner.

Solution 5: Check the alignment of the Feeder to make sure the slide

original holder is centered. See “Aligning the Feeder” on page

30.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Keine Kommentare

Hasselblad 949 Bedienungsanleitung Seite 29